Stan if you are talking about the austrons I know how to set them.
Could call you if thats easier

On Wed, Mar 21, 2012 at 10:10 AM, Stan, W1LE <stanw...@verizon.net> wrote:

>
> Don, you are absolutely correct, Dana is in Indiana and not Illinois.
>
> Austron offered a model 2084 LF Multicoupler, with 1 antenna input and 4
> outputs.
> Could be AC or DC powered, with peak and spherics indicator lamps, and 8
> each tunable
> notch filters from 70 thru 130 KHz that can be individually switched
> inline or out.
>
> I should be able to take the FS700 Loran-C (RF) front panel output, feed
> the multicoupler,
> then feed a Austron 2100F and the 2100 to monitor other GRIs.
> Just have to find my notes on how to set up the older RXs.
>
> I had lock onto 89700 microsecond GRI overnight and using the internal
> FS700 phase meter
> I got as low as 3E-13 for delta frequency between the Loran-C and the
> T'Bolt GPS/DO.
> I am locked onto the Seneca, NY station.
>
> Stan, W1LE    Cape Cod   FN41sr
>
>
> If I am not mistaken Dana is not in Illinois it is in Indiana.
>
>> Still receiving at 2200 hrs local.
>> Don
>>
>> _
>>
>
>
> ______________________________**_________________
> time-nuts mailing list -- time-nuts@febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/**
> mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts>
> and follow the instructions there.
>
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Reply via email to