On 7/5/2012 3:57 PM, bill wrote:
On 7/5/2012 9:49 AM, Randy D. Hunt wrote:
On 7/4/2012 11:09 PM, Charles P. Steinmetz wrote:
Don wrote:
the fet breakdown voltage has of course got to be high enough.
If the nuvistor is used as a common-cathode or common-grid
amplifier, you can cascode the fet with a bipolar to extend its
drain voltage range. You will need to come up with an appropriate
bias source for the bipolar. Generally, you would want at least
10-15 volts across the FET channel.
Choose an appropriate JFET (transconductance, drain current, and
gate-drain voltage similar to the nuvistor at the nuvistor's
operating point). You can add degeneration (source resistance) to
lower the FET's transconductance if it is higher than the nuvistor's.
Best regards,
Charles
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
I have a PDF document that covers this for Fetrons. This is from
Teledyne. It shows some of the more common tube replacements with
the circuit and actual device number. Let me know if you would like a
copy and I will sent it to you. Or, maybe a better option would be
to upload it to something like Didiers site. . .
Randy
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
Yes do upload it. I have some Fetrons and want to know what they
replace. And in my other life, I ordered some custom Fetrons
to replace some WE tubes that was used in WE K carrier. If you don't
upload it, send a copy.
Bill K7NOM
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
I uploaded the PDF to Didiers' site. Hope this helps some of you out
there. . .
Randy, KI6WAS
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
