John only indirectly from other RBs and they are FRS's. They start off higher 8-11 or so volts then come down to a lower value and sit there for a long time. I would think you are mid to early life. More towards the mid. But thats good for quite a few years.
Regards Paul WB8TSL On Mon, Aug 27, 2012 at 9:33 PM, J. Forster <[email protected]> wrote: > Hi, > > I'm just powering a new to me Datum Rb, Type 102500-001, LPRO for the > first time. The unit locks up quickly, and after about an hour, I checked > the Lamp voltage. > > My unit is sitting at 6.9 VDC. > > From the manual on Didier's site, below 3.0 or over 14 indicate failure. > Does anyone know whether the measured voltage should be for a new unit? > I'm trying to guestimat the remaining life. > > Thanks, > > -John > > ============ > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
