Hi I think they would do better to just put in a connector to drive it with a TBolt….
Bob On Aug 30, 2012, at 8:47 PM, Don Latham <[email protected]> wrote: > Elecraft seems to be having some trouble with the KX3 stability for WSJT > on 6m. They also have a temp sensor on the bard, apparently and are also > trying this out. I don't know any more about it than that. > Don > > Jim Lux >> On 8/30/12 9:33 AM, Bob Camp wrote: >>> Hi >>> >>> The fundamental / third approach is one of several possible ways to >>> go. You >>> can also run an SC on the B and C modes to get thermometer data. Early >>> implementations used a pair of independent blanks, one cut to be a >>> good >>> thermometer. Some have even gone as far as to mount a thermistor on >>> the >>> crystal. >>> >> >> I've used the "sensor on oscillator can" technique very recently on a >> software defined radio. Over the next year, I'll get some data on how >> well it works in use. The idea is to use a low power TCXO and a sensor, >> rather than an OCXO, to meet a fairly tight frequency requirement (a few >> hundred Hz out of 2 GHz) The TCXO can get you do a few ppm or better. >> The sensor should let me get about an order of magnitude better, and I >> need to measure the temperature anyway, and it's easy to integrate with >> the software waveform code. >> >> >> >> _______________________________________________ >> time-nuts mailing list -- [email protected] >> To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. >> > > > -- > "Neither the voice of authority nor the weight of reason and argument > are as significant as experiment, for thence comes quiet to the mind." > De Erroribus Medicorum, R. Bacon, 13th century. > "If you don't know what it is, don't poke it." > Ghost in the Shell > > > Dr. Don Latham AJ7LL > Six Mile Systems LLP > 17850 Six Mile Road > POB 134 > Huson, MT, 59846 > VOX 406-626-4304 > www.lightningforensics.com > www.sixmilesystems.com > > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
