Hi There were a *lot* of firmware updates to the Oncores. I don't know if the re-flash images are still out there or not. If they are, it wouldn't hurt to upgrade the card. I don't think it will fix your problem, but it won't hurt either.
Bob On Nov 7, 2012, at 1:06 AM, Ed Palmer <ed_pal...@sasktel.net> wrote: > Hi Mike, > > My unit has the standard 6 channel VP. In fact, here's the ID message: > > COPYRIGHT 1991-1995 MOTOROLA INC. > SFTW P/N # 98-P39972M > SOFTWARE VER # 8 > SOFTWARE REV # 4 > SOFTWARE DATE 13 JUL 1995 > MODEL # B1121P1114 > HDWR P/N # _ > SERIAL # SSG0239632 > MANUFACTUR DATE 7H18 > OPTIONS LIST IB > > I understand that the 'B1' start to the model number means that it's quite > old. > > I don't remember if I ever did a full reset so I just did one. We'll see what > happens. > > Thanks, > Ed > > On 11/6/2012 10:20 PM, Mike S wrote: >> On 11/6/2012 2:59 PM, Ed Palmer wrote: >>> But if this is a firmware issue, shouldn't there be lots of Z3801As with >>> this problem? I suspect that there's a fault with my unit, but I can't >>> imagine what. >> >> Does your unit by chance have an 8 channel Oncore VP instead of the stock 6 >> channel one? >> >> Also, have you tried a full reset (:system:preset)? >> >> _______________________________________________ >> time-nuts mailing list -- time-nuts@febo.com >> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. >> > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.