Hello, I have a pair of FE-5682A coming, not that I need them, but I had flat shipping from the seller freakyflickers on ebay fro another item, I was asked 14USD each.
I'm a bit confused by the pinout on the datasheet: http://www.ko4bb.com/Manuals/05)_GPS_Timing/FEI/FE-5682A_Datasheet_REVB.pdf The pinout: 1 RF out 2 RF RTN (Chassis GND) 3 DC ISOL RF RTN 4 CHASSIS GND 5 Lamp Volts 6 BITE OUT 7 EXT. C-FIELD V adj. 8 -48V RTN 9 CRYSTAL V MON 10 POWER -48V a) power supply: On the specs it reports "Input Voltage Range +19 TO +32Vdc" but the pinout reports pins 10 "POWER -48V" and 8 "-48V RTN" how is supposed to be powered? b) pins 1 and 2 seem self explanatory, but pin 3 "DC ISOL RF RTN" what should mean? Should I connetc it to ground (or any reference I have)? c) pins 5 and 9 are monitors for working voltage of lamp and VCXO, am I correct? When I will have the units here I'll open them up and post some pics. Fabio. ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
