Thank you, Peter and Paul. Now I see that the pinout is almost identical to LPRO-101, the only difference are pins 8 and 10 for power supply. That's nice, I like the external C-Field control, and monitor voltage for lamp, they can be useful.
I'm not familiar with telco power supplies, I know only that they used 48V with positive to ground. So the supply should be 48V, positive to pin 8 and negative to 10 ? Should I expect the GND to be connected to pin 8? Or it will be floating at middle voltage (hence the 19 to 32V rating), in this case all I need will be a dual 24V psu. Fabio. ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
