Hi Be careful with the BNC connectors on those switches. 75 ohm BNC's aren't the same as 50 ohm connectors. The inner contact is different enough that they don't always play well together.
Bob -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Arthur Dent Sent: Thursday, February 21, 2013 3:57 PM To: [email protected] Subject: [time-nuts] altinex switches I haven't looked any further but the daughter boards in the unit have 75 ohm resistors which I'm guessing determines the input/output impedance of the unit. If that's the case it should be easy to switch it to 50 ohms although it may not make any real difference. -Arthur _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
