I'm not sure about the Racal, but the HP 5345A can be placed into talk-only mode and used to stream readings to TimeLab in "Acquire->Acquire from counter in talk-only mode" . JohnA's link is the right one to use.
The advantage to trying it with the HP 5345A is that I have one around here, so I can reproduce your setup if you have trouble getting it to work. Should be pretty straightforward, though. -- john, KE5FX Miles Design LLC > -----Original Message----- > From: [email protected] [mailto:time-nuts- > [email protected]] On Behalf Of Dan Rae > Sent: Monday, February 25, 2013 7:39 AM > To: Discussion of precise time and frequency measurement > Subject: [time-nuts] GPIB counter logging / plotting software? > > I am working on 400 - 500 MHz DDS clocks for an amateur radio project > and would like to record over gpib and plot the relative frequency > drifts over time of different versions of the oscillator from a cold > start. I have Racal 1992 and -hp- 5345 counters available, themselves > driven from gps. I have the prologix USB thingy. > > Does anyone know of any software that will enable me to do this, without > spending lots of money? > > Dan > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi- > bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
