If the schematics are available then you can reverse engineer a solution or adaptation. the other thing I do is hunt down the hp journal for the device that used them and when it was introduced. Often the article will give you a fair hint as to whats going on. However the real detail of sample pulse behavior and even power supply voltages are going to be a guess and gamble. Some modules have helpful markings. Like agc or +12V.. But again its a real guess. Regards Paul
On Fri, Mar 29, 2013 at 9:53 AM, Daniel Mendes <[email protected]> wrote: > Looking at e-pay (nobody here seems to refer to it by it´s name... don´t > know why.. any relationship to Sauron?) I found several items from HP > named "samplers", like: > > http://www.ebay.com/itm/**Agilent-5086-7961-Sampler-**50GHz-/120789801136<http://www.ebay.com/itm/Agilent-5086-7961-Sampler-50GHz-/120789801136> > http://www.ebay.com/itm/HP-**Agilent-5340A-Microwave-** > Sampler-Mixer-5088-7004-**Hewlett-Packard-/360587630399?** > pt=LH_DefaultDomain_0&hash=**item53f4b2973f<http://www.ebay.com/itm/HP-Agilent-5340A-Microwave-Sampler-Mixer-5088-7004-Hewlett-Packard-/360587630399?pt=LH_DefaultDomain_0&hash=item53f4b2973f> > http://www.ebay.com/itm/**AGILENT-HP-5086-7143-** > OSCILLATOR-SAMPLER-4-2GHz-/**200838068537?pt=LH_**DefaultDomain_0&hash=** > item2ec2e1b939<http://www.ebay.com/itm/AGILENT-HP-5086-7143-OSCILLATOR-SAMPLER-4-2GHz-/200838068537?pt=LH_DefaultDomain_0&hash=item2ec2e1b939> > http://www.ebay.com/itm/HP-**Agilent-5340A-Drive-Assembly-** > Sampler-5088-7005-05340-60078-**Filter-Assy-2-/360587630209?** > pt=LH_DefaultDomain_0&hash=**item53f4b29681<http://www.ebay.com/itm/HP-Agilent-5340A-Drive-Assembly-Sampler-5088-7005-05340-60078-Filter-Assy-2-/360587630209?pt=LH_DefaultDomain_0&hash=item53f4b29681> > http://www.ebay.com/itm/HP-**8056-7143-4-2-GHz-OSC-SAMPLER-** > /230660987481?pt=LH_**DefaultDomain_0&hash=**item35b4775a59<http://www.ebay.com/itm/HP-8056-7143-4-2-GHz-OSC-SAMPLER-/230660987481?pt=LH_DefaultDomain_0&hash=item35b4775a59> > http://www.ebay.com/itm/**Agilent-HP-5086-7143-Osc-** > Sampler-4-2-GHz-/220739669474?**pt=LH_DefaultDomain_0&hash=** > item33651c0de2<http://www.ebay.com/itm/Agilent-HP-5086-7143-Osc-Sampler-4-2-GHz-/220739669474?pt=LH_DefaultDomain_0&hash=item33651c0de2> > http://www.ebay.com/itm/HP-**Agilent-5340A-Microwave-** > Sampler-Mixer-5088-7004-**Hewlett-Packard-/360587630399?** > pt=LH_DefaultDomain_0&hash=**item53f4b2973f<http://www.ebay.com/itm/HP-Agilent-5340A-Microwave-Sampler-Mixer-5088-7004-Hewlett-Packard-/360587630399?pt=LH_DefaultDomain_0&hash=item53f4b2973f> > http://www.ebay.com/itm/HP-**Agilent-5086-7699-Sampler-/** > 281062317963?pt=LH_**DefaultDomain_0&hash=**item41709e9f8b<http://www.ebay.com/itm/HP-Agilent-5086-7699-Sampler-/281062317963?pt=LH_DefaultDomain_0&hash=item41709e9f8b> > http://www.ebay.com/itm/HP-**Agilent-08411-80003-Microwave-** > RF-Reference-Sampler-/**270781008280?pt=LH_**DefaultDomain_0&hash=** > item3f0bce4998<http://www.ebay.com/itm/HP-Agilent-08411-80003-Microwave-RF-Reference-Sampler-/270781008280?pt=LH_DefaultDomain_0&hash=item3f0bce4998> > http://www.ebay.com/itm/HP-**Agilent-5086-7614-SAMPLER-** > ASSEMBLY-/271153098534?pt=LH_**DefaultDomain_0&hash=**item3f21fbef26<http://www.ebay.com/itm/HP-Agilent-5086-7614-SAMPLER-ASSEMBLY-/271153098534?pt=LH_DefaultDomain_0&hash=item3f21fbef26> > http://www.ebay.com/itm/HP-**5086-7162-2-4-GHz-SAMPLER-/**230500659679<http://www.ebay.com/itm/HP-5086-7162-2-4-GHz-SAMPLER-/230500659679> > > > Seems that under this name there´s 2 type of devices: RF Samplers, that > are simple RF power dividers, and high speed sample-and-hold circuits. I´m > trying to find these, and derive a way to make them work work again. > > All the work I did up to now seems to indicate that these are the sample > and hold units: > > http://www.ebay.com/itm/**Agilent-5086-7961-Sampler-**50GHz-/120789801136<http://www.ebay.com/itm/Agilent-5086-7961-Sampler-50GHz-/120789801136> > http://www.ebay.com/itm/HP-**Agilent-5086-7699-Sampler-/** > 281062317963?pt=LH_**DefaultDomain_0&hash=**item41709e9f8b<http://www.ebay.com/itm/HP-Agilent-5086-7699-Sampler-/281062317963?pt=LH_DefaultDomain_0&hash=item41709e9f8b> > http://www.ebay.com/itm/HP-**Agilent-5086-7614-SAMPLER-** > ASSEMBLY-/271153098534?pt=LH_**DefaultDomain_0&hash=**item3f21fbef26<http://www.ebay.com/itm/HP-Agilent-5086-7614-SAMPLER-ASSEMBLY-/271153098534?pt=LH_DefaultDomain_0&hash=item3f21fbef26> > > The problem is how to find a way to put them back to work. No datasheet > seems to be available, and the equipments where they came from don´t seem > to have schematics availabre either. Any ideas? > > Daniel > ______________________________**_________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/** > mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts> > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
