Hi, Tom -- A paper in the 2010 EFTF described the use of a pair of 11848A boxes from the 3048A system, which is similar to the E5500 hardware ( http://www.congrex.nl/EFTF_Proceedings/Papers/Session_14_Oscillators_and_Noi se/14_04_Bale.pdf ). You could ping those authors if you haven't already. Also, have you talked with Craig Nelson about his work with the NI digitizers and T/H amps?
The 70820A GPIB documentation is part of the overall 71500A reference guide at http://cp.literature.agilent.com/litweb/pdf/70820-90051.pdf . -- john, KE5FX Miles Design LLC > -----Original Message----- > From: [email protected] [mailto:time-nuts- > [email protected]] On Behalf Of Tom Knox > Sent: Saturday, March 30, 2013 10:17 AM > To: Time-Nuts > Subject: [time-nuts] Building a Agilent Cross Correlated Phase Noise > Measurement System. > > We are looking into using two N/E550XA/B Phase Noise systems and the > 89410A to build a Cross Correlated measurement system. > I was wondering if anyone has attempted this before? Does anyone know > where to find the base GPIB command codes for the 70420A system? > Thanks; > Thomas Knox > > Phase Noise Measurement Group > NIST > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi- > bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
