Hi Miles; Thanks for the paper. Craig is actually the one taking the lead on this project. I will keep the group updated on the project.
Thomas Knox > From: [email protected] > To: [email protected] > Date: Sat, 30 Mar 2013 16:10:21 -0700 > Subject: Re: [time-nuts] Building a Agilent Cross Correlated Phase Noise > Measurement System. > > Hi, Tom -- > > A paper in the 2010 EFTF described the use of a pair of 11848A boxes from > the 3048A system, which is similar to the E5500 hardware ( > http://www.congrex.nl/EFTF_Proceedings/Papers/Session_14_Oscillators_and_Noi > se/14_04_Bale.pdf ). You could ping those authors if you haven't already. > Also, have you talked with Craig Nelson about his work with the NI > digitizers and T/H amps? > > The 70820A GPIB documentation is part of the overall 71500A reference guide > at http://cp.literature.agilent.com/litweb/pdf/70820-90051.pdf . > > -- john, KE5FX > Miles Design LLC > > > -----Original Message----- > > From: [email protected] [mailto:time-nuts- > > [email protected]] On Behalf Of Tom Knox > > Sent: Saturday, March 30, 2013 10:17 AM > > To: Time-Nuts > > Subject: [time-nuts] Building a Agilent Cross Correlated Phase Noise > > Measurement System. > > > > We are looking into using two N/E550XA/B Phase Noise systems and the > > 89410A to build a Cross Correlated measurement system. > > I was wondering if anyone has attempted this before? Does anyone know > > where to find the base GPIB command codes for the 70420A system? > > Thanks; > > Thomas Knox > > > > Phase Noise Measurement Group > > NIST > > > > _______________________________________________ > > time-nuts mailing list -- [email protected] > > To unsubscribe, go to https://www.febo.com/cgi- > > bin/mailman/listinfo/time-nuts > > and follow the instructions there. > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
