On Mon, May 6, 2013 at 3:38 PM, Miguel Barbosa Gonçalves <[email protected]> wrote: .. > > You'll have to make the driver talk to the configuration / monitoring port > (port B) as the timing port (port A) does not accept commands. >
So this does not apply to the Thunderbolt? It only has one port. If it worked on all PALISADE type GPSes I'd do it. > >.... > With this configuration I can stop using the PALISADE driver and configure > the Acutime to send NMEA sentences and use the PPS for better accuracy. NEMA is only used to number the seconds. It is the PPS that does the timing. You don't gain accuracy with NEMA. And interresting trick is to put two or more GPS units on the same computer. then use NTP to compare. You can test out what works best and measure the differences -- Chris Albertson Redondo Beach, California _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
