Well, I also had some bad magic happen.
Last night, I decided that I would shutdown my HP 8935 so that I could
move it back to its usual place. When I turned it on this a.m. it
wouldn't power up. There is a known failure mode in the power supplies
of the 89XX series. I will probably just do an exchange for a re-built
supply.
It looks like I will have a new project for next weekend!
Fred
On 5/19/2013 9:10 AM, J. L. Trantham wrote:
Good to hear.
I love it when magic happens.
Joe
-----Original Message-----
From: [email protected] [mailto:[email protected]] On
Behalf Of Frederick Bray
Sent: Saturday, May 18, 2013 5:55 PM
To: [email protected]
Subject: Re: [time-nuts] OCXO Adjustment Question
Thanks to all the people who have commented, I believe that I have
recovered the original Ovenaire OCXO. I re-flowed a bunch of solder
joints on the PC board(s) and reassembled the oven with the foam. Even
without the can over it, it is now stable. I plan to complete the
re-assembly and leave it as it presently is after setting it to a GPSDO
with a scope. I will save the MV89 for another project.
Fred
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
