It's nice to have something to do. Sorry to hear of the 'bad' magic but, at least, it's not the same problem all over again.
Joe -----Original Message----- From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On Behalf Of Frederick Bray Sent: Sunday, May 19, 2013 12:11 PM To: Discussion of precise time and frequency measurement Subject: Re: [time-nuts] OCXO Adjustment Question Well, I also had some bad magic happen. Last night, I decided that I would shutdown my HP 8935 so that I could move it back to its usual place. When I turned it on this a.m. it wouldn't power up. There is a known failure mode in the power supplies of the 89XX series. I will probably just do an exchange for a re-built supply. It looks like I will have a new project for next weekend! Fred On 5/19/2013 9:10 AM, J. L. Trantham wrote: > Good to hear. > > I love it when magic happens. > > Joe > > -----Original Message----- > From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On > Behalf Of Frederick Bray > Sent: Saturday, May 18, 2013 5:55 PM > To: time-nuts@febo.com > Subject: Re: [time-nuts] OCXO Adjustment Question > > > Thanks to all the people who have commented, I believe that I have > recovered the original Ovenaire OCXO. I re-flowed a bunch of solder > joints on the PC board(s) and reassembled the oven with the foam. Even > without the can over it, it is now stable. I plan to complete the > re-assembly and leave it as it presently is after setting it to a GPSDO > with a scope. I will save the MV89 for another project. > > Fred > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.