I'm looking at the schematic. I thought the goal was to get the 60KHz signal from WWVB to the HP unit. This schematic sends an approximatly 60KHz signal from the tuning fork to the HP. but copies the AM modulation from WWVB. So the 8170 does not look at the 60KHz carrier? and only cars about the time code?
Maybe another way then is to bypasss the radio inside the 8170 and just send the demodulated logic bit On Sun, Jun 16, 2013 at 6:08 PM, ken johnson <[email protected]> wrote: > Also now on my web site, > > http://www.vk7krj.com/ham_stuff.htm > > at the bottom of the page, along with some other time-nut type files. > > And, once again, if anyone has any other time-nut files they would like to > see hosted on a web page, I am happy to oblige. Just email me. > > On Mon, Jun 17, 2013 at 10:24 AM, Majdi S. Abbas <[email protected]> wrote: > > > On Sun, Jun 16, 2013 at 05:43:18PM -0400, paul swed wrote: > > > OK no schematic. It was 2MB. But it was a scan of my notes. Happy to > post > > > to a sight or two. Can include some pictures also. > > > > There's a copy here for those that are interested: > > > > https://latt.net/wwvb%20remodulator%20spectracom%208170.jpg > > > > Majdi > > _______________________________________________ > > time-nuts mailing list -- [email protected] > > To unsubscribe, go to > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > -- Chris Albertson Redondo Beach, California _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
