Thanks for the pix and to the comments. Chris you can indeed hack the 8170 insides. On the 8170 its intended to be a time receiver. So Spectracom simply re-used what they had already developed for the other phase tracking receivers. Good business. But it does not at all work as suggested. You have to introduce the carrier and such so that both agc will work correctly. (Even though its fixed) and lock comes on. Absolutely what I would do for a one off. However some folks would prefer not to go into the operating room. Sounds like you are on your way to a private hack. Let us all know how it turns out. It will work. Regards Paul. WB8TSL
On Mon, Jun 17, 2013 at 12:52 PM, Chris Albertson <[email protected] > wrote: > Here is an even smaller version, at the same resolution. The trick is to > remove the background. Then all you have is mostly a plank sheet and a > small amount of ink that compresses very well. > > What you do is adjust the contrast until you have only pure white and pure > black. That alone does 90% of the work. Save it as a monochrome file to > kill the color channels then set the JPG compression as strong as you can. > > > On Mon, Jun 17, 2013 at 5:21 AM, paul swed <[email protected]> wrote: > > > By golly it is readable thanks. What did you use to shrink it? > > > > > > On Mon, Jun 17, 2013 at 12:59 AM, Rex <[email protected]> wrote: > > > > > On 6/16/2013 2:43 PM, paul swed wrote: > > > > > >> OK no schematic. It was 2MB. But it was a scan of my notes. Happy to > > post > > >> to a sight or two. Can include some pictures also. > > >> > > >> > > > I shrunk the schematic down to <100k and I think still quite readable. > > > Attempting to attach it to this posting. > > > > > > > > > > > > _______________________________________________ > > > time-nuts mailing list -- [email protected] > > > To unsubscribe, go to > > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > > and follow the instructions there. > > > > > _______________________________________________ > > time-nuts mailing list -- [email protected] > > To unsubscribe, go to > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > > > > > > -- > > Chris Albertson > Redondo Beach, California > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
