Hi "ANTENNA OPEN" = antenna isn't drawing the current it should.
You may have a low current antenna / the sense resistor may be shorted / the sense ADC is blown. Fast check - put a tee in series with the antenna. Terminate the open port with a 200 to 400 ohm resistor. If the problem does not go away, it's not a low current antenna. If it switches to "antenna overload" then it's almost certainly a low current antenna. Bob On Jul 6, 2013, at 4:59 PM, Jim Sanford <[email protected]> wrote: > All: > > I suspected I had some stupid setting wrong . . . . . well, close. Turns out > the port labelled COMM1 is in fact, COMM2. Once I figured that out, both > LadyHeather and TBOLTmon communicate. Now I have to figure out why, after > acquiring a LOCK yesterday, today it is declarning, ANTENNA OPEN. > > Thanks for all the help! > > 73, > Jim > [email protected] > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
