When I try to enter my antenna location as per surveyor: -33.763698 151.092111
With this scpi command: :GPS:POS S,+33,+79,3.69800E+001,E,+151,+9,+2.11100E+001,+9.45600E+001 For some reason, the Z3816A displays this: LAT S 33:59:36.980 LON E 151:09:21.110 Which is correct except the south should say 33:79:36.980. I can enter lower values that 59 for parameter 3 and it displays correct. Can't seem to find a manual for these chaps either. Shooting off the subject, Just had one arrive with a loose OCXO. Yes loose, the solder joint on the OCXO had broken away from the PCB. The intermittent contact was causing all sorts of chaos. Most noticeably, the red ALARM LED came on, but none of the scpi commands could tell me why. Health monitor reported [ OK ] <shrug> Anyway, Any idea how I can enter the correct co-ordinates? --marki _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
