Thanks Bjorn, you were exactly correct, somehow I did have the dBc/Hz option selected.
Russ ------------------------------ > > Message: 3 > Date: Sun, 21 Jul 2013 08:55:10 +0200 > From: "Bj?rn" <[email protected]> > To: "Discussion of precise time and frequency measurement" > <[email protected]> > Subject: Re: [time-nuts] Tboltmon AMU range > Message-ID: > <[email protected]> > Content-Type: text/plain;charset=iso-8859-1 > > Hi Russ > > AMU is a Trimble invented quality unit. I once heard a professor describe > it as "A Meaningless Unit". > > The Tbolt can change between AMU and dBc. With your range, the Tbolt has > been switched to dBC, it is not showing AMUs. > > Approaching 50 with your high elevation SVs is excellent. You have a very > good setup! > > If you wish to check it further, run Lady Heather with the "Signal > Strength vs Az/El" plot enabled. > > http://www.ke5fx.com/heather/readme.htm > http://www.mail-archive.com/[email protected]/msg40567.html > > -- > Bj?rn > > > I moved my Trimble bullet up the pole to have a 360 degree unobstructed > > view and now the AMUs for the SVs are reading in the 39-50 range. Is this > > too high or normal? > > > > Russ > > _______________________________________________ > > time-nuts mailing list -- [email protected] > > To unsubscribe, go to > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
