https://plus.google.com/u/0/photos/111617808980322733757/albums/5890266601277045697
The board with the edge connector was inside the same bag the connector was in, the bag was taped to the unit. I pulled the ends off first, but was immediately stopped with foam, it is glued in place. Then when I finally got the lid with all the screws off, all there is, is one board covered in potting compound. The compound breaks away pretty easily. One can see where a couple parts were replaced and there soft RTV was used. There are two precision resistors in that area. The biggest surprise is the General Radio logo on the board ! goo.gl/1XGG2F _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.