maybe I should read things more often .. yikes I need a vacation
On Sun, Jul 28, 2013 at 7:01 AM, George Dubovsky <[email protected]> wrote: > Well, the outside label does claim it was made by GENRAD... ;-) > > 73, > > geo - n4ua > > > On Sat, Jul 27, 2013 at 9:24 PM, Pete Lancashire <[email protected] > >wrote: > > > > > > https://plus.google.com/u/0/photos/111617808980322733757/albums/5890266601277045697 > > > > The board with the edge connector was inside the same bag the > > connector was in, the bag was taped to the unit. > > > > I pulled the ends off first, but was immediately stopped with foam, it is > > glued in place. > > Then when I finally got the lid with all the screws off, all there is, is > > one board covered in potting compound. > > > > The compound breaks away pretty easily. One can see where a couple parts > > were > > replaced and there soft RTV was used. There are two precision resistors > in > > that area. > > > > The biggest surprise is the General Radio logo on the board ! > > > > goo.gl/1XGG2F > > _______________________________________________ > > time-nuts mailing list -- [email protected] > > To unsubscribe, go to > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
