Oops, that height should be "54" mm.
>________________________________ > From: Bob Stewart <[email protected]> >To: Time Nuts <[email protected]> >Sent: Thursday, October 10, 2013 1:15 PM >Subject: [time-nuts] Choke Ring Antenna - Patch Placement? > > >I bought a set of Wilton "tuned" pie pans yesterday to experiment with a choke >ring antenna. The "kit" consists of 4 pans of diameters 12", 10", 8", and 6". > The height of the sides is more or less 51mm. I've been experimenting with >placement of the patch in the pit, but I don't know what I'm looking for, so a >little help would be appreciated. Am I looking for best overall signal level >from horizon to azimuth, or something else? I'm not sure I would know how to >measure multi-path levels. There seems to be a definite difference depending >on whether the patch is at the bottom, somewhere in the middle, level with the >rim of the pans, or even perched on a DVD disk which is level with the rim. I >don't have any sort of metal container to use as a support for the patch at >this point. > >Bob - AE6RV >_______________________________________________ >time-nuts mailing list -- [email protected] >To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >and follow the instructions there. > > > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
