Hi Ed; This may help: http://www.ko4bb.com/Manuals/Fluke/Fluke_6071/Fluke_6071_Service_Manual-1.pdf http://www.davmar.org/Spec/Fluke6070A-spec2.pdf Best Wishes; Thomas Knox
Ascent Concepts and Technology 4475 Whitney Place Boulder Colorado 80305 1-303-554-0307 > Date: Mon, 14 Oct 2013 08:44:12 -0700 > To: [email protected] > From: [email protected] > Subject: [time-nuts] Need Fluke 6071A synthesizer info > > I recently acquired a Fluke 6071A, and have found some pieces of the > service and operating manuals, but not the schematics. Does anyone > know where the schematics can be found? This unit looks pretty good > except the "FREQ" and "UNCAL" indicators are flashing. I managed to > decipher enough of the diagnostic error code info to find the > "sub-synthesizer" loop is unlocked, and I hope that adjustment of its > VCO will fix it. This section is of course buried inside the inner > layers of the RF deck stack, so will be tricky to get at and rig for > temporary running while opened up. The manual info is good for > figuring this out, but the schematics would of course be a big help > for this and future maintenance. > > Is there any kind of fluke-nuts group on febo.com? I think there's a > fluke group at yahoo, but that stupid neo form of groups interface is > so screwed up that I'm reluctant to join any more yahoo groups. I > will probably have to try anyway for this one. > > I also vaguely recall that in recent months this model was noted as > being pretty good in terms of phase noise for time-nuts purposes, but > I couldn't find it in the discussions. > > Ed > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
