----- Original Message -----
From: "d0ct0r" <[email protected]>
To: <[email protected]>
Sent: Sunday, March 02, 2014 12:54 AM
Subject: [time-nuts] FSCM 38243 Power Distribution Module
Does anybody knows if FSCM 38243 8-way P/D module is suitable for 10MHZ
frequency ? The module I have, has no other information on it except
Serial No.: 171-0100-048. Looks like its old Minicircuits product. But I
am not sure. I am planing to connect 10Mhz GPSDO output to it.
--
Those transformers do not look like they are for any frequency near 10 MHz.
I would take a guess that this is for UHF frequencies. Why don't you
terminate 7 of the ports into 50 ohms and measure the loss from the main
port to the 8th port. Do you have access to a signal generator and a RF
voltmeter/spectrum analyzer/receiver/other way to measure RF?
Or feed in 10 MHz and look at the output with a scope. In any event, it will
have a lot of loss, probably around 12 dB.
Regards,
Tom
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
