>From the construction and components used it isn't UHF ;-) It appears to be 7 >two way splittters in series and the transformers look to have plenty of turns.
As you have a 10MHz source why not just try it out? You should get about 9dB attenuation input to output with the other ports terminated in 50R. This could be checked by reference to a 10dB attenuator with a 50R load, diode and multimeter as indication if you don't have an accurate power meter. Or if you ship it to me I can stick it on a VNA and give you exact specs. HTH Robert G8RPI. ________________________________ From: d0ct0r <[email protected]> To: [email protected] Sent: Sunday, 2 March 2014, 5:54 Subject: [time-nuts] FSCM 38243 Power Distribution Module Does anybody knows if FSCM 38243 8-way P/D module is suitable for 10MHZ frequency ? The module I have, has no other information on it except Serial No.: 171-0100-048. Looks like its old Minicircuits product. But I am not sure. I am planing to connect 10Mhz GPSDO output to it. -- WBW, V.P. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
