Hi It’s a 10 MHz box from the look of it. Everything looks like it’s in the right place and nothing is broken. It should be good for at least 100 mw into it. It will have at least 9 db of loss just from the power splitting. If you want 7 dbm out of it, you will need at least 16 dbm into it.
The board looks like it was laid out for a more sophisticated version and then cost reduced to what you see. If I had to guess I’d say it came out of one of the multitude of small outfits in Maryland and Northern Virginia. I would not at all be surprised to find it fed a rack of RA 6790GM’s or something very similar. Bob On Mar 2, 2014, at 12:54 AM, d0ct0r <[email protected]> wrote: > > Does anybody knows if FSCM 38243 8-way P/D module is suitable for 10MHZ > frequency ? The module I have, has no other information on it except Serial > No.: 171-0100-048. Looks like its old Minicircuits product. But I am not > sure. I am planing to connect 10Mhz GPSDO output to it. > > -- > WBW, > > V.P.<2.jpg><1.jpg>_______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
