Hi If you want to go a bit crazy, there are places that will package up die for you. Depending on the resulting package, cost is in the $0.30 to $20 per part range. Most of the places will hit you with a ~ $500 setup charge and are unlikely to deal in less than 1,000 piece lots (unless things are really slow - not the case right now).
If it’s a part that will fit in a “normal” ceramic DIP package, you *might* be able to manually wire bond it. Your local university it a good place to scout around for somebody with the gear to do the job. It’s not all that hard to do. It’s a “case of beer” sort of deal to get a handful of parts done. That assumes you can find the right guy and pay for the packages. There are a *lot* of them doing short run ASIC’s these days and they have to try them out somehow. The MPW run costs them < $5K so they don’t spend a lot on the packaging. Bob On Jul 2, 2014, at 12:49 PM, paul swed <[email protected]> wrote: > Emailed Pete at Everset about the ES100 and 200 chips and unfortunately > only chip dies are available. I am good but not that good. > He suggests that someday a vendor will be selling a clock and thats the > only reasonable option that will be available. > All in all completely unattractive, as someone is going to pay for this > clever new timecode and it surely won't be me. > Though if the clocks are in the $20 range thats a different discussion. > Somehow I suspect its the $1000 range. No honest clue though. > So clearly not a useful path to d-psk the wwvb or actually anything else. > Tom so much for the predictive approach at least to a point. > Regards > Paul. > WB8TSL > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
