Err, that is TEI-14949 AD1W The "4" got eaten somehow.
-Chuck Harris [email protected] wrote:
TNX for that information Chuck!! 73 Don W4WJ In a message dated 7/10/2014 5:29:28 P.M. Central Daylight Time, [email protected] writes: Be warned, that Trompeter makes at least two varieties. The one you want has the thicker center pin that extends to within 1/8 inch of the end of the shield. The incorrect connector has a thinner center pin that only extends to about 1/4 inch of the end of the shield. The family number of both the right and the wrong connector is the same: TEI-14949 The part that specifies the pin is AD1 for the wrong connector, and AD1W for the right connector... So the full part number of the connector you desire is: TEI-1949 AD1W These are Western Electric (eg. telco) connectors, not the more common video patch panel connectors. -Chuck Harris
_______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
