Bert,
I hope this will satisfy your curiosity somewhat:
http://rubidium.se/~magnus/time/oscilloquartz/20140904_215635.jpg
I don't have any info on the B-5400 unfortunately.
As you see, the 8602 comes in three variants, 8602, 8602.11 ans
8602.11.05. The later two have some differences in setability range, but
nothing major, I don't have enough detail.
Some other 8600/8601 data is here:
http://rubidium.se/~magnus/time/oscilloquartz/8601/
Wish I had more to share, the little more I have is not that interesting.
Cheers,
Magnus
On 09/04/2014 08:31 PM, Bert Kehren via time-nuts wrote:
Good evening Magnus
You should post it on time nuts. Do you know the specs on these? I have not
seen a data sheet on the 8602 , 8612 or B-6400. now 8613 and what about
11?
Bert
In a message dated 9/4/2014 1:27:12 P.M. Eastern Daylight Time,
[email protected] writes:
Bert,
On 09/04/2014 12:56 PM, Bert Kehren via time-nuts wrote:
Tom
Thank you for the information on the OSA 3210
This is what I know. OSA 3000 is the Cs module only with three OCXO
versions B-5400, 8602 and 8612.
Later versions of the OSA 3000 also had 8613. I have seen 8613 and
8602.11 myself.
All the pictures and information I have seen and
the modules that I have, show identical boards and assemblies.
Depending on oscillator, time-constants was different, but that is just
mounting-cases of the same board.
Cheers,
Magnus
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
