Thanks for your feedback. This is indeed a bit expensive for that application.
The x5 multiplier is indeed just the harmonic 5 capture with the helical 
filter. I'll let you know the outcome. This probably won't beat any expensive 
ULN source but might be a good starting point for low cost. Worth to try

Stephane


-----Message d'origine-----
De : time-nuts [mailto:[email protected]] De la part de S. Jackson via 
time-nuts
Envoyé : mardi 16 septembre 2014 02:11
À : [email protected]
Objet : Re: [time-nuts] newcomer

Hi Stephane,
 
our customer just needed +/-50KHz free-running over all conditions including 
aging, so stability was not of major concern, and the unit easily performs 
significantly better than that. We did make a VCO version for PLL disciplining 
so you can lock it to a GPSDO or in a correlated phase noise test system etc. 
The stability is thus not really good, but sufficient for Radar applications.
 
The technology is a Crystal oscillator multiplied by 5x internally I think 
(maybe it was 3x, can't remember), then by 2x externally. Since it is a MilSpec 
 compliant part it is not that low-cost, but it is lower-cost and much 
higher-performance than the legacy part it replaces. More than $1K for sure  
though. It also has some additional tricks up its sleeve such as a built-in  
DC-DC switcher and power supply filter allowing operation from +6V to 
+15V  without affecting output power, and allowing noisy external power
supplies to be  used, and harmonics lower than -32dBc typically by using the 
steep ceramic  low-pass filters.
 
That Abracom part looks pretty nice too, and your approach should work well  
too if you can get the 5x multiplier working well. Get a good 10MHz OCXO and 
use  an AD PLL chip such as ADF4002 etc to lock that Abracom part with a pretty 
small  loop BW (<100Hz), and you will have the best of both worlds.
 
Bye,
Said
 
 
In a message dated 9/15/2014 16:52:18 Pacific Daylight Time, 
[email protected] writes:

Thanks  for the details. 

This miniaturized device is nice.  



There is no information regarding stability. Anything there ?  What's the 
technology inside ? crystal, TCXO ?

What is the approx  price for a such device ? 



The VCXO I was targetting is this  one :
http://www.abracon.com/Precisiontiming/ABLNO.pdf

This should  bring more or less the same level of PN once multiplied than your  
ULN_1G.

However the frequency accuracy is poor and it needs to be  disciplined in most  
applications.



Cheers

Stephane

_______________________________________________
time-nuts mailing list -- [email protected] To unsubscribe, go to 
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.


---
Ce courrier électronique ne contient aucun virus ou logiciel malveillant parce 
que la protection avast! Antivirus est active.
http://www.avast.com

_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Reply via email to