and here comes another trick:
Ulrich's Z38XX can be persuaded to accept the Z3811 instead of an Z3805.
For this to happen search with an Hex-editor in Z38XX twice for the
string z3805 and replace this z3805 with z3811, save the changes and
enjoy the various "View"s Ulrich provided.
Götz
Am 30.10.2014 18:13, :
Just a hint: I tried successfully Ulrichs Z38XX software
(http://www.ulrich-bangert.de/html/downloads.html)
in Windows7-32. At least the "Manual Command Entry" and the "Debug
Window" should work.
regards Götz
Am 29.10.2014 23:55, :
Hi
One thing that might help others who are having issues with these units:
Which pins did power go to?
Which pins do you see RX (and maybe TX) data on?
Which cables went where (and their pinout) to interconnect this or that?
What software are you using?
Yes, One could make some pretty quick guesses at most of this. It’s
often a quick guess gone wrong that messes people up …
Bob
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
