Hi Bob:
I agree with you. But the chapter is a easy way to check your new counter
when it arrived, and it's not only a calibration of just self test, it's
testing counter's performance on some level.
Regards.
Hui Zhang
At 2014-11-22 10:22:53, "Bob Camp" <[email protected]> wrote:
>Hi
>
>Probably the best information out there on setting up a SR620 is buried in the
>archives of this list back a few years. The back and forth required on some of
>the adjustments is far from obvious. You do need to start from the manual and
>get it as far as the manual will allow. You then go into the “Time Nuts
>advanced” procedures.
>
>Bob
>
>> On Nov 21, 2014, at 9:19 PM, Hui Zhang <[email protected]> wrote:
>>
>> The SR620's manual is perfect, there is a whole chapter has detail
>> information of performance test. You can use that way for check the
>> counter's condition.
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> Hui Zhang
>>
>>
>>
>>
>>
>>
>>
>>
>> At 2014-11-22 07:51:41, "Dr. David Kirkby (Kirkby Microwave Ltd)"
>> <[email protected]> wrote:
>>> After regrettably selling my 5370B a few years ago, I decided to look for a
>>> used SR620.
>>>
>>> Are there any particular issues with these that could be tested by the
>>> seller prior to shipping it? I have not downloaded the manual yet, but I
>>> assume there's a basic test in there - probably similar to that in the
>>> 5370B manual.
>>>
>>> Were these available with a Rb oscillator? I see a seller on eBay that he
>>> has some Rb ones for $1500 extra, but I don't see it as an option on the
>>> SRS web site.
>>>
>>> Dr David Kirkby
>>> Managing Director
>>> Kirkby Microwave Ltd
>>> Registered office: Stokes Hall Lodge, Burnham Rd, Chelmsford, Essex, CM3
>>> 6DT, United Kingdom
>>> Registered in England and Wales as company number 08914892
>>> http://www.kirkbymicrowave.co.uk/
>>> Tel 07910 441670 / +44 7910 441670 (0900-2100 GMT)
>>> _______________________________________________
>>> time-nuts mailing list -- [email protected]
>>> To unsubscribe, go to
>>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>>> and follow the instructions there.
>> _______________________________________________
>> time-nuts mailing list -- [email protected]
>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>
>_______________________________________________
>time-nuts mailing list -- [email protected]
>To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
