> 4 RX+ > 8 RX- Looks good.
> 5 TX+ > 6 TX- I think there is a typo in there. That should be pins 5 and 9. I'm using pins 9, 8, and 7 as per Stewart's message that started this discussion. > 3 and 7 ground Pins 1, 2, and 6 seem not-connected. (That's using a scope without a ground clip. I see slight fuzz on pins 3 and 7, nothing on 1, 2 and 6.) The above is on J8, Diagnoistic. -------- J6, RS422/PPS has the same (5, 9) TX pins. If you shift the cable over there it gets a line each second. This can be handy for checking that direction of your setup. Pins 1 and 6 are the PPS pulse. 400 microseconds wide. It's not active on my box that's in STBY. Pins 4 and 8 look like inputs. Does anybody know what you can send in there? -- These are my opinions. I hate spam. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
