Good morning Anthony, Yes, I did see your posting. Thank you for your help.
cheers, Graham ve3gtc On 12/3/2014, "Anthony Roby" <[email protected]> wrote: >I sent you my posting earlier today, so hopefully you saw it. The Lucent unit >seems liberal in its interpretation of the pinouts, but once you've deciphered >it and got the +ve and -ve pins connected, it works reliably. > >Anthony > >-----Original Message----- >From: time-nuts [mailto:[email protected]] On Behalf Of Graham >Sent: Tuesday, December 02, 2014 5:36 PM >To: [email protected] >Subject: Re: [time-nuts] Lucent KS-24361 RS-422 interface pinout > >Thanks all for answering my question. I looked through old posting but >obviously didn't stumble upon Anthony's posting otherwise I would have had my >answer. > >I made up a short cable to connect the Startech ICUSB422 to the KS-24361 >J8 Diagnostic port and I can now connect. This is the final pinout: > >Startech KS-24361 >ICUSB422 J8 - Diagnostic >========================================= > 1 TXD- --------------> RXD- 8 > 2 TXD+ --------------> RXD+ 4 > 3 RXD+ <-------------- TXD+ 5 > 4 RXD- <-------------- TXD- 9 > 5 GND --------------- GND 7 > 6 NC > 7 NC > 8 NC > 9 NC > >Seems RS-422 is a standard but pinouts vary. Live and learn. > >cheers, Graham ve3gtc > > > >On 2014-12-01 21:10, Bob Camp wrote: >> Hi >> >> If you dig back a month or so, there is a post with all the pinouts on all >> the connectors. >> >> 4 RX+ >> 8 RX- >> >> 5 TX+ >> 6 TX- >> >> 3 and 7 ground >> >> It ??s serial so TX on one goes to RX on the other. + goes to + and - to - >> The pins are numbered on the connector in *very* small print. >> >> Bob >> >> >> > >_______________________________________________ >time-nuts mailing list -- [email protected] To unsubscribe, go to >https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >and follow the instructions there. >_______________________________________________ >time-nuts mailing list -- [email protected] >To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >and follow the instructions there. > > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
