Same here. I have a Z3805A from this vendor that works flawlessly, and I know of other people that purchased from him without any problems.
To call it a cam when a HP unit comes with a remanufactured box is quite a harsh statement, IMHO. I'm glad they are putting those ugly units into a neat and practical box that is made with attention to every detail. Adrian ed briggs schrieb: > I’ve never had a problem with this vendor. I’ve purchased a Z3801a, and a > Z3805a and both work fine, and I have the equipment to measure that. I’ve > also purchased several items of agilent test gear from this vendor, and they > all worked fine, and were accompanied by a test and calibration form which > was accurate. On two occasions when I’ve had questions, I sent mail and > received prompt answers. > > > I’m sorry to hear you are having difficulties with your 58503a, but on the > basis of my experience, I would not call this vendor disreputable, as others > seem to be suggesting. I’d suggest sending him an email. If you have to > return the unit, I suspect he’ll honor the return terms and conditions which > accompanied the offering. If you are having problems with the DC-DC > converter, you might also point that out to him since he seems to have parts > from time to time. > > > Others may have had other experiences, but my experiences with this vendor > have all been positive. > > > ed > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
