Hi You see a lot of surplus HP gear with the feet pulled. That was pretty standard when gear was rack mounted.
Bob > On Dec 13, 2014, at 10:18 AM, Dr. David Kirkby (Kirkby Microwave Ltd) > <drkir...@kirkbymicrowave.co.uk> wrote: > > On 13 December 2014 at 11:13, Dr. David Kirkby (Kirkby Microwave Ltd) > <drkir...@kirkbymicrowave.co.uk> wrote: >> I have a counterfeit 58503A which appears to run warmer than I would >> have expected. I'm not sure if this may be by design, or if there is a >> fault, or maybe there is simply not enough ventilation slots in this >> fake case. Please see the attached pictures, and let me know if you >> think that it is reasonable. > > > I just noticed. Since there are no feet on this, there is no way any > air can get into the slots in the base!!!! The oven was running too > hot for me to touch - I doubt that is normal, but perhaps others no > different. > > Dave > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.