>From pictures bumpers are installed in an inverted position. Reverse them
Whoever put this together in CN did not have any idea of how this series of cases are assembled or did not care Content by Scott Typos by Siri > On Dec 13, 2014, at 2:08 PM, HP-mini <[email protected]> wrote: > > On Sat, 2014-12-13 at 15:18 +0000, Dr. David Kirkby (Kirkby Microwave > Ltd) wrote: > >> I just noticed. Since there are no feet on this, there is no way any >> air can get into the slots in the base!!!! The oven was running too >> hot for me to touch - I doubt that is normal, but perhaps others no >> different. >> >> Dave > > Pull the rear rubberized plastic bump stop off the case & fit it up the > other way. > > As long as the OCXO operates below its turning point it has thermal > control. Only need to dissipate the non-heating power, that sets the max > operating temperature. > Some OCXOs are quieter running in high temperature ambient still air. > All are degraded by changes in thermal load. > Brett. > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
