Skytraq has also confirmed the issue and is working on a firmware update. Updating the Skytraq firmware on the LTE-Lite Eval Board requires the unit be returned to Jackson Labs for reprogramming. We will update the Skytraq firmware on units at no charge if units are returned to us. Please contact us off list to make arrangements for returns.
Also, the ROM firmware in the Skytraq does not exhibit this issue, so selecting the ROM boot with a jumper between pins 1 and 2 of J3 is a work-around. When making the J3 connection, be sure to remove power to the board to avoid corrupting the flash. The LTE-Lite will operate in a mobile mode without sawtooth correction when the Skytraq is booted from ROM. Thanks, Keith Keith On Mon, Jan 26, 2015 at 10:43 AM, Keith Loiselle <keith.loise...@gmail.com> wrote: > We have confirmed this issue with the Skytraq firmware on the LTE-Lite and > are working with Skytraq to obtain a firmware update. I will post again > when a firmware update is available. > > Keith > > > Keith > > On Sun, Jan 25, 2015 at 5:47 PM, Bill Beam <wb...@gci.net> wrote: > >> Odd indeed. My LTE-lite is one second late, appears to have already >> added the pending leap second. >> I can compare with four other GPS timeing receivers using time pulse on >> DCD line. The NMEA data >> reports in error. I am awaiting reply from JL. This is not good for an >> eBay sniper.... >> >> Bill, NL7F >> >> On Sun, 25 Jan 2015 12:12:55 -0800, Tom Van Baak wrote: >> >> >Hi Paul, >> >> >Odd, my LTE-Lite appears spot on. Let's take this off-list and see >> what's going on. >> >> >If anyone else has been logging SkyTraq NMEA or binary from the LTE-Lite >> let us know. >> >> >> Bill Beam >> NL7F >> >> >> >> _______________________________________________ >> time-nuts mailing list -- time-nuts@febo.com >> To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. >> > > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.