5V into 50 Ohms means 100 mA. Perhaps you need a medium power transistor
amplifier or opamp.
Bob
On Wednesday, March 4, 2015 6:09 AM, Martyn Smith <[email protected]>
wrote:
Hello,
A quick question.
My output driver for a simple amplifier.
I use three gates (in parallel with resistors) from a 74AC14 to give me about
0-3.2V into 50 ohm.
I want to have a driver that gives me a full 0-5V (at least 0-4.5V) swing into
50 ohms.
Can anyone recommend an IC that can delivery this.
But it needs to have similar jitter performance to the 74AC14.
I use it up to 10 MHz.
Best Regards
Martyn
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
