Mark, and anyone else interested; I have an 'E' Thunderbolt, and use LH3.10 to monitor it contiguously, and with no issues not related to the device itself (iffy eeprom/flash, crystal jumps), but it even shows all 12 slots for available birds, so it works fine for me on W7Pro. No special command line options for serial port. EdgePort USB converter.
JimT Sent from *my* galaxy (Nexus). On Mar 9, 2015 10:37 PM, "Mark Sims" <[email protected]> wrote: > Lady Heather is set up to run the serial port at 9600,8,N,1 If it sees > data errors, after around 20-35 seconds or so, it toggles to 9600,8,O,1 > This feature was added to support the Trimble Resolution timing > receivers. You can try the /rt command line option and see if that makes > any difference. That will force the ODD parity flag. Or you might try > configuring the receiver for 9600,8,N,1 via the Trimble software. BTW, Lady > Heather has never been officially tested with the Thunderbolt-E ... nobody > seems to use/have them. > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
