Any chance your issue is related to trying to maximize the windows size with Lady Heather. Perhaps try a different start up screen resolution in the Lady heather settings.
On Wed, Mar 11, 2015 at 5:04 PM, James Tucker <[email protected]> wrote: > Mark, and anyone else interested; > > I have an 'E' Thunderbolt, and use LH3.10 to monitor it contiguously, and > with no issues not related to the device itself (iffy eeprom/flash, crystal > jumps), but it even shows all 12 slots for available birds, so it works > fine for me on W7Pro. No special command line options for serial port. > EdgePort USB converter. > > JimT > > Sent from *my* galaxy (Nexus). > On Mar 9, 2015 10:37 PM, "Mark Sims" <[email protected]> wrote: > > > Lady Heather is set up to run the serial port at 9600,8,N,1 If it sees > > data errors, after around 20-35 seconds or so, it toggles to 9600,8,O,1 > > This feature was added to support the Trimble Resolution timing > > receivers. You can try the /rt command line option and see if that > makes > > any difference. That will force the ODD parity flag. Or you might try > > configuring the receiver for 9600,8,N,1 via the Trimble software. BTW, > Lady > > Heather has never been officially tested with the Thunderbolt-E ... > nobody > > seems to use/have them. > > _______________________________________________ > > time-nuts mailing list -- [email protected] > > To unsubscribe, go to > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
