Hi Joe,
You might upload them to KO4BB.com with a short note on what they are. There
is a 53132 directory there.
Regards,
Tom
----- Original Message -----
From: "J. L. Trantham" <[email protected]>
To: "'Discussion of precise time and frequency measurement'"
<[email protected]>
Sent: Sunday, April 19, 2015 4:38 PM
Subject: Re: [time-nuts] [Bulk] Re: [Bulk] Re: Ultra High Stability Time
Base Options for 53132A
If anyone is interested in adding a clearer version of the 53132-60011
board on page 13 of the CLIP for the 53132A, I have redrawn the schematic.
I have the values of all components except 4 capacitors that appear to all
be the same. I can measure them, if needed, but I will have to remove the
unit from my counter.
I plan to do that in a few weeks when the MV89 version of the time base
arrives.
Please let me know if you would like a .PDF of the 'redrawn' schematic.
About 2.2 MB file.
I also have pictures of the board if anyone needs that as well.
Joe
-----Original Message-----
From: time-nuts [mailto:[email protected]] On Behalf Of J. L.
Trantham
Sent: Monday, April 13, 2015 7:04 AM
To: 'Discussion of precise time and frequency measurement'
Subject: [Bulk] Re: [time-nuts] [Bulk] Re: Ultra High Stability Time Base
Options for 53132A
Fuzzy page 13 is the 53132-60011, with the extra components not found on
the 53132-60016, which is on page 45 and much clearer. It is an LM361M
and is on both boards.
Now that I have the 53132-60011 board, I plan to start with page 45 and
're-draw' a clear page 13.
Joe
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
