Charles, Thanks for the help. I need to learn how to add text to .PDF documents.
To change the focus a bit, I'm just getting to know the Morion variant but it seems very impressive so far. As a 'SEVERE' novice in the 'time-nuts' arena, if anyone is interested in helping me characterize the two time bases in the 53132A, I would love to try to make some useful/helpful measurements to try to characterize the 53132A's ability to do time/frequency measurements with the HP 010 option versus the Morion variant. I probably have the needed equipment to do the measurements but would love to get some 'tutoring' on how to make useful/helpful measurements. Thanks again. Joe -----Original Message----- From: Charles Steinmetz [mailto:[email protected]] Sent: Monday, May 04, 2015 11:00 AM To: Discussion of precise time and frequency measurement Cc: J. L. Trantham Subject: Re: [time-nuts] Ultra High Stability Time Base Options for 53132A Joe wrote: >C2, C3, C4, and C5 on the HP 53132-60011 board * * * appear to be >.01 uF SMT caps. These parts are not on the 53132-60016 board. * * >* > >Charles Steinmetz has annotated the schematic of the 53132-60011 board >to clarify some issues as well. > >Please add these values to your schematics. > >I'll see if I can make a modification to the schematic and upload the >details to Didier's site. I am attaching a file with the capacitor values added. I have also uploaded it to Didier's site (filename is "HP_53132-60011_Timebase_Support_Board_redrawn.pdf"). Thanks, Joe, for your diligence! Best regards, Charles _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
