Luca, You can pry out the plastic pins easily.
Then remove the thin foam piece. Then if I remember correctly you will have to diagram where each color of wire goes to the edge connector and then unsolder them. Now you can remove the guts, some pressure on the tuning capacitor thru the hole will aid in getting it to slide out. The distortion on the output might be normal. If you just hook scope to it they almost allways look distorted. You have to properly load the output into 1KOhm to get the sine wave. Cheers, Corby _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
