Bob/TNuts .. I have a HP / Symmetricom unit that has a dual oven 10811 that was part of a telecom master clock distribution system that was only meant to run in a controlled environment.
https://goo.gl/photos/xpfnxRegRyuykLSy5 Just another data point -pete On Sun, Aug 2, 2015 at 3:26 PM, Bob Camp <[email protected]> wrote: > Hi > > The “external” heater on the Z3801 OCXO is only needed if you are > regularly running below -20C in your environment. Other than > the alarm signal, there is no harm in letting it simply shut off forever. > > Bob > > > On Aug 2, 2015, at 8:56 AM, [email protected] wrote: > > > > > > Hi, > > I have seen, but I do not remember where, someone have rebuilt the > external oven controller to complete a stand alone OCXO removed from an > HPZ3801A. > > Can you hep me to find the document? > > > > Luciano > > timeok > > > > > > Message sent via Atmail Open - http://atmail.org/ > > _______________________________________________ > > time-nuts mailing list -- [email protected] > > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
