Thank you all for the information, worse case I look at 70 feet with two couplings all in an inaccessible attic. The cable is quality but vintage 1989. Part of an extensive cable TV wiring. So far nine with two I am not able to locate the other end.The way they are installed I am not able yet to use one of them to pull a new one in. Twenty years ago I probably would have risked crawling in there. Don't want to fall 16 feet at age 73. Bert Kehren Palm City . In a message dated 12/5/2015 5:11:01 P.M. Eastern Standard Time, [email protected] writes:
Bert, Extending the RG-6U using N-connectors should not be giving you more than 0.20 dB, probably less. Considering that you have have 6.12 dB per 100 feet in RG-6U at 1 GHz (should be about 8 dB @ 1.575 GHz), so it will be more. Using N-connectors to extend the cable-stretch isn't going to be a major issue, it may be the cable length that could present an issue. I've been fighting these issues, and used too long cable at hand (RG-58 is a terrible choice but was lying around at the time). I use LMR-400 these days, giving me about 5.1 dB per 100 feet. If cable and connector damping causes you harm, then consider installing an additional LNA inline with the antenna. Hope it sort itself out for you. Cheers, Magnus On 12/05/2015 09:28 PM, Bert Kehren via time-nuts wrote: > At my new home the GPS antenna location has turned in to a challenge. May > have to splice RG 6U. Has any one done measurements on couplings and the > loss associated with them. Right now I am considering a female, female > coupling. Is there a better alternative? > Thanks Bert Kehren Palm City Fl. > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
