OK excellent Jim. That should be gud-e-nuf asthey say. On your scope you should be able to sniff the multiplier chain and see if every thing is there certainly at the low end were the sythesiser mixes into the multiplier. I start a business trip in the morning so will not respond till Friday most likely. I will be able to give you better advice when I get back. Pull the manual etc. Do you use skype. I have helped guys remotely pretty well. Regards Paul
On Tue, Dec 8, 2015 at 4:23 PM, Jim/Anna McIntyre <[email protected]> wrote: > Paul, > > I have a 350 MHz scope, HP5335A, various power supplies, DVMs, and sig gens > up to 1 GHz. No working Spec An on my bench now, but I have access to one > if needed... > > Jim > > > > ---------- Forwarded message ---------- > From: paul swed <[email protected]> > Date: Tue, Dec 8, 2015 at 1:35 PM > Subject: Re: 5065 ?? direct > To: Jim/Anna McIntyre <[email protected]> > > > Jim what kind of test equipment do you have? Kind of helps to understand > what approaches could be used to figure it out. > Funny I have a HP5061 CS its a true Frankenstein in reality using a 5060 > tube. Absolutely on its last fumes. I have had a funny offset forever in it > and finally figuring what the issue really seems to be. > Crazy stuff. > Regards > Paul > WB8TSL > > On Mon, Dec 7, 2015 at 12:15 PM, Jim/Anna McIntyre <[email protected]> > wrote: > > > Good to know. I wasn't aware of the 'sweep'. I'll look for that tonight > > when I get home. > > > > Fingers crossed... > > > > > > Jim > > > > > > > > On Mon, Dec 7, 2015 at 12:02 PM, paul swed <[email protected]> wrote: > > > >> Great that you have a pdf. > >> My concern is that when you hit reset. The meter should swing all the > way > >> left when in control V and drift all the way to the right. > >> Thats the sweep that its looking for the 2 nd harmonic and occurs > onetime > >> on reset. > >> > >> On Mon, Dec 7, 2015 at 11:54 AM, Jim/Anna McIntyre <[email protected]> > >> wrote: > >> > >>> Thanks for the note, Paul. I found a PDF on 'First Aid' for the 5065. > >>> Looks like I'll leave it as-is for a few days and see if the 2nd > harmonic > >>> level comes up. Nothing so far. > >>> > >>> 73, > >>> > >>> Jim > >>> > >>> N9FWC > >>> > >>> > >>> > >>> On Mon, Dec 7, 2015 at 9:06 AM, paul swed <[email protected]> wrote: > >>> > >>>> Jim > >>>> You will find great support on Time-nuts with respect to the 5065. > >>>> There is the worst possible thing and that is the tube being bad. > >>>> Thats actually a rare occurrence. Generally something else is the > issue > >>>> and actually only a few parts can't be replaced with something else > newer > >>>> and a bit of fiddling. > >>>> May be easier to yak on skype. > >>>> My skype is wb8tsl > >>>> Regards > >>>> Paul > >>>> WB8TSL > >>>> > >>>> > >>> > >> > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
