On 6/23/2016 9:36 PM, Bob Camp wrote: > Hi > > The gotcha with “really slow” is that once you print the solder paste on the > board, it has a very > limited “open air” life. If you don’t get the board done fairly quickly, your > soldering quality can > suffer quite a bit. > > Bob > For most of the paste formulations I've had no trouble with several hours of working time. So you need to get at it, but really don't end up hurting yourself, but can't leave it overnight. .
-- mailto:[email protected] Oz POB 93167 Southlake, TX 76092 (Near DFW Airport) _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
