[email protected] said: > I'm looking into a TU36-D400-020 receiver.
> What antenna to use? I would prefer something mounted inside the case. It > is wood so an internal antenna will hopefully work. The board comes with a > pigtail but it is not SMA. That's an old receiver. Modern receivers are much more sensitive and much more likely to work indoors. I suggest getting a modern chip. Some of them come packaged with an antenna. Then you can play around with it from a PC, arduino, or Raspberry Pi to figure out what you will have to do and how well it will work. Here is one to consider: Adafruit Ultimate GPS Breakout - 66 channel w/10 Hz updates - Version 3 https://www.adafruit.com/product/746 If you have room on the display, you can display the offset between the time as derived from GPS and the time from the power line. :) -- These are my opinions. I hate spam. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
